1. Introduction to basic cost overage detection notification

You can set up separate cost alarms in CloudXper (Set up CloudXper Cloud Cost Alarms)

If you do not set up a separate setting, you can prevent the discovery of a sudden increase in costs.

We have launched the 'Cost Anomaly Detection Notification' feature, which sends an email when the cost of an account (AWS: linked account / Azure: subscription / GCP: project) with authority within CloudXper suddenly increases under the following conditions.

1-1. Criteria for sending cost overage detection notifications

Accounts with at least one of D-3 and D-4 within CloudXper worth over 100,000 won are included in the basic

• If at least one of D-3 and D-4 is over 100,000 won and under 1 million won and has increased by more than 300%

• If at least one of D-3 and D-4 is 1 million won or more but less than 10 million won and has increased by 180% or more

• If at least one of D-3 and D-4 is 10 million won or more but less than 100 million won and has increased by 100% or more

• If at least one of D-3 and D-4 exceeds KRW 100 million and increases by more than 40%

1-2. Notification recipients

If a cost that reaches the above criteria occurs in an account (AWS: linked account / Azure: subscription / GCP: project) that has authority among CloudXper IDs,

Send email to the account owner

(ex. If CloudXper's ewshin account has permission to AWS 111,222,333 linked accounts, 
 When a cost overage notification that meets the above criteria occurs in the 111 linked account,
      Send notification to ewshin’s email)

2. How to check details when receiving a cost overage detection notification

Cost Analysis > Cost Analysis or Cost Analysis > Cost DashboardYou can check it out at .

For detailed confirmation methods, please refer to the separate FAQ video below.

(Link) How to check cost overrun detection details - Video Guide

3. If you want to adjust the range of cost overage detection notifications

If you want to adjust the alarm range, you can adjust the permissions in cloudxper.

Open

After logging into CloudXper, click on the name in the upper right corner > Apply for permissions and roles

Open

Click 'Select Permissions' for the company/service/account for which you want to add or remove permissions, then click 'Apply for Permissions'

4. How to disable email notifications if you do not want to receive cost overage detection notifications

4-1. Go directly to the release screen from the cost overage detection email

Open

Clicking 'here' at the bottom of the email body will take you directly to the 'Default Cost Abnormality Detection Notification' alarm release page. (If you are already logged in to CloudXper)

If you are unable to connect directly to the page, please refer to the information below and access it directly from CloudXper.

4-2. Go to the cost overage detection mail release screen on the CloudXper screen.

To do this, go to CloudXper Login > Management > Cost Notification Settings and click the X button to the right of ‘Default Cost Anomaly Detection Notification’.

Open

Open